Linux, Figure 109 macintosh os x: network, Verifying settings – ZyXEL Communications P-660R-D Series User Manual
Page 172
P-660R-D Series User’s Guide
12
Appendix D Setting up Your Computer’s IP Address
Figure 109 Macintosh OS X: Network
4 For statically assigned settings, do the following:
•
From the Configure box, select Manually.
•
Type your IP address in the IP Address box.
•
Type your subnet mask in the Subnet mask box.
•
Type the IP address of your ZyXEL Device in the Router address box.
5 Click Apply Now and close the window.
6 Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
Linux
This section shows you how to configure your computer’s TCP/IP settings in Red Hat Linux 9.0.
Procedure, screens and file location may vary depending on your Linux distribution and release version.
Note: Make sure you are logged in as the root administrator.