Zoom DVD Home Theatre System - Manual (Page 20)

E - 19 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page)
Playing a Disc
DVD CD
This owner’s manual explains the basic instructions of this DVD Unit. Some DVD discs are
produced in a manner that allows specific or limited operation during playback. As such, the
DVD Unit may not respond to all operating commands. This is not a defect in the DVD Unit. Refer
to the instruction notes of discs.
“ ” may appear on the TV screen during operation. A “ ” means that the desired
operation is not permitted by the DVD Unit or the disc.
Basic playback
Playing a Disc
1. Press the POWER button on the front panel or press the POWER button on the remote control to turn on the unit
while the unit is in standby mode, press the FUNCTION button on the remote or DVD button on the front panel to
select DVD mode. It will take a short for disc holder automatically rotating to load disc 1.
2. While VFD of the unit displays “Load” or “NO DISC”, press the OPEN / CLOSE button. The disc tray opens.
3. Press DISC (1-5) select button, after a while, the disc tray will automatically close and then open. Disc holder will
automatically rotate one cycle and stop.
4. Place the first disc on the disc holder with the label side up.
5. Press DISC (1-5) select button to rotate disc holder to load other discs.
6. Press the OPEN / CLOSE button. The disc tray closes.
It takes a short while for your unit to load the discs. After loading, for some discs, the unit will automatically start
playback of the disc.
7. Press the PLAY button.
8. Press DISC (1-5) select buttons to select other disc playback.
Notes:
• Use the OPEN / CLOSE button on the front panel to open or close the disc tray. Do not push the disc tray or you
may damage the Unit.
• Let the disc tray open completely before removing the discs. Press the OPEN / CLOSE button to close the disc
tray after you remove the discs.
Pausing playback (still mode)
Press the II PAUSE button. To resume normal playback, press the PLAY button.
Stopping playback
Press the STOP button at the location where you want to interrupt playback. To resume playback at the position
where the disc was stopped, press the PLAY button.
If you press the STOP button twice, the Unit’s memory will be cleared and pressing the PLAY button will reset
the disc to the beginning.
DVD CD
To skip to a different track
• Press the SKIP button once to skip to the start of the previous track.
• Press the SKIP button to skip to the next track.
• For audio CD disc, use the number buttons (remote control only) to jump straight to that track number.
Notes:
• During playback, disc tray can be opened/closed to add disc and the current disc playback will not be interrupted
but if you press DISC (1-5) select buttons while the disc tray is opening, the disc tray will automatically open and
close one time and the current disc playback will be interrupted.
• The / (SKIP) buttons can only be used to choose a track of the current disc. To choose a track of another
disc, DISC (1-5) select buttons should be pressed to get to the desired disc first.