ZyXEL Communications G-360 - Manual (Page 56)

ZyXEL G-360 User’s Guide
4-2 Maintenance
4.2 Uninstalling the ZyXEL Utility
Follow the steps below to remove (or uninstall) the ZyXEL Utility from your computer.
Step 1.
Click Start, Programs, ZyXEL G-360 Wireless Adapter, Uninstall.
Step 2. When prompted, click OK to remove the driver and the utility software.
Figure 4-2 Confirm Uninstall
Step 3. Click Finish to complete uninstalling the software. Restart your computer if prompted.
4.3 Upgrading the ZyXEL Utility
Before you uninstall the ZyXEL Utility, take note of the current network
configuration.
To perform the upgrade, follow the steps below.
Step 1.
Download the latest version of the utility from the ZyXEL web site and save the file on your
computer.
Step 2. Follow the steps in Section 4.2 to remove the current ZyXEL Utility from your computer.
Step 3. Restart your computer when prompted.
Step 4. After restarting, refer to the procedure in the Quick Start Guide to install the new utility.
Step 5. Check the version numbers in the About screen to make sure the new utility is installed
properly.