ZyXEL Communications P-662HW-D - Manual (Page 6)

P-662HW-D Series Quick Start Guide
6
OTIST
ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically configure the
SSID and WPA-PSK on all OTIST-equipped wireless clients within range of the P-662HW-D.
Note: If you enable OTIST but select Disable wireless security using the wireless wizard, the P-
662HW-D will create a WPA-PSK automatically.
If you enable OTIST and select Manually assign a WEP key using the wireless wizard, the P-
662HW-D will replace the WEP key with a WPA-PSK.
Enable OTIST only if your wireless clients support WPA and OTIST.
You must enable OTIST on the P-662HW-D and all wireless clients within three minutes in any order.
To start OTIST on the P-662HW-D, hold in the RESET button for one to five seconds. Do not hold the RESET
button in for too long, as this will reset the P-662HW-D to the factory defaults.
To enable OTIST on wireless clients, click Start in the Adapter screen. The Setup Key is 01234567 by default.
If you have previously saved a setup key on the P-662HW-D, use it instead of the default.
For more information, see Wireless LAN in the User's Guide.
Troubleshooting
1 If you cannot access the web configurator using Internet Explorer in Windows XP or Windows Server 2003,
make sure you allow pop-up windows, JavaScript and Java permission or set the Internet security level to
any level lower than High in Internet Explorer (in Internet Explorer, click Tools > Internet Options >
Security > Custom Level...). See the appendix in the User’s Guide for more information.
2 If you cannot access the Internet when your computer is connected to the ETHERNET port, follow these
steps.
7 Click INTERNET / WIRELESS
SETUP. Wait while your P-
662HW-D tries to detect your
DSL connection.
8 Follow the directions in the
wizard. Do not change default
settings if your ISP did not
provide them.