Zenith R50W47 - Manual (Page 15)

Owner’s Manual 15
Operation
SETUP
VIDEO
AUDIO
TIME
OPTION
LOCK Prev.
EZ Scan
Ch.Edit
DTV Signal
Ch. Label G
Main Input
Sub Input
MENU
Selection ( G or )
leads you to the
channel logo screen.
- Choose preset labels for your channels.
- If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a DTV channel -
even if you didn't preset a label for the channel.
1. Press the menu button and then use D / E button to select the SETUP menu.
2. Press the G button and then use D / E button to select Ch. Label .
3. Press the G button. You will now see a menu filled with labels and a preview screen.
4. Use the ch +/- button to select a channel to label.
5. Use D / E / F / G button to select the appropriate label for the channel, then press enter button to set the label to the
selected channel.
6. Press exit button to return to TV viewing or press menu button to return to the previous menu.
Channel Labels Setup Channel Labels Setup
- Reveals how strong your DTV signal is and whether you need to adjust your antenna or digital cable input.
The higher the signal strength, the less likely you are to experience picture degradation.
- Digital DTV Signals: May not be available in all areas, nor are broadcast on all programs.
1. Press the signal button.
2. View the on-screen signal strength monitor to see the quality of the signal being received.
• You can also check the DTV Signal strength with the SETUP menu.
DTV Signal Strength DTV Signal Strength
- Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any other devices that are connected to
your TV.
1. Press the menu button and then use D / E button to select the SETUP menu.
2. Press the G button and then use D / E button to select Main Input .
3. Press the G button and then use D / E button to select the source: DTV, Analog,
Video1, Video2, Front Video, Video4, Component1, Component2, or DVI.
4. Press exit button to return to TV viewing or press menu button to return to the
previous menu.
Main Picture Source Selection Main Picture Source Selection
SETUP
VIDEO
AUDIO
TIME
OPTION
LOCK Prev.
EZ Scan
Ch.Edit
DTV Signal
Ch. Label
Main Input G
Sub Input
DTV
Analog
Video1
Video2
Front Video
Video4
Component1
Component2
DVI
MENU