Jazz gtr, Std.kit1, Playing voices – Yamaha DGX-202 User Manual

Page 24

Advertising
background image

Playing Voices

24

●

Select the voice number

Select a voice by using the dial or the SELECT [

]/[

] buttons.

■

Use the numeric keypad.

There are two ways to select voices: 1) directly entering the voice number
with the numeric keypad, or 2) using the [+]/[-] buttons to step up and down
through the voice numbers.

●

Using the numeric keypad

Enter the digits of the voice number as listed on page 79. For example, to
select voice #109, press “1” on the numeric keypad, then “0”, “9.” For
voice numbers beginning with zeroes (such as #042 or #006), the initial
zeroes may be omitted. In this case, there is a short pause before the indi-
cation appears.

●

Using the [+]/[-] buttons

Press the [+] button to select the next voice number, and press the [-] but-
ton to select the previous voice. Holding down either button continuously
scrolls up or down through the numbers.

>

<

032

Jazz Gtr

109

Std.Kit1

• Each voice is automatically

called up with the most suitable
octave range setting. Thus, play-
ing middle C with one voice may
sound higher or lower than
another voice at the same key.

Advertising