Zenoah HB250 - Manual (Page 16)

16
UP! Dispose of debris in trash receptacles.
■ MAINTENANCE
1. In order to maintain your product in proper working
order, perform the maintenance and checking
operations described in the manual at regular
intervals.
2. Always be sure to turn off the engine and disconnect
the spark plug before performing any maintenance
or checking procedures.
The metallic parts and engine cover reach high
temperatures immediately after stopping the
engine.
3. Examine the blower at intervals for loose fasteners
and rusted or damaged parts. Use special care
around the fuel line, the muffler, and the ignition
wiring.
4. All engine service except for those described in this
manual should be performed by competent service
personnel. Improper service to the blower fan and
muffler could cause a hazardous failure.
5. When replacing the any other part, or any lubricant,
always be sure to use only KOMATSU ZENOAH
products or products which have been certified by
KOMATSU ZENOAH for use with the KOMATSU
ZENOAH product.
6. In the event that any part must be replaced or any
maintenance or repair work not described in this
manual must be performed, please contact a
representative from the store nearest KOMATSU
ZENOAH authorized servicing dealer for assistance.
7. Do not use any accessory or attachment other than
those bearing the KOMATSU ZENOAH mark and
recommended for the unit.
8. Under no circumstances should you ever take apart
the product or alter it in any way. Doing so might
result in the product becoming damaged during
operation or the product becoming unable to operate
properly.
WARNING
5. For safe operation
English