Zanussi W 1242 W - Manual (Page 9)

9
4. Select the spin speed or option
or
Turn the dial to the required position.
5. Select the programme
Turn the programme selector dial clockwise to the
programme K.
6. Start the machine
Before starting up the machine check that:
● the appliance is plugged in
● the water supply taps are turned on
● the drain hose is correctly and securely positioned
● the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF button: the mains-on light will
illuminate and the machine starts operating.
T0001S
ON
OFF
K
M0017a
450
550
650
700
800
900
1000
7. At the end of the programme
The machine stops automatically.
If you have selected the RINSE HOLD option , the
machine will stop with the water of the last rinse left in
the tub, to prevent the fabric from creasing. To drain
only, select position
or the drain programme “S”.
To drain and spin, select programme “M” or turn the
spin speed selector dial to the desired speed position: the
machine will spin at the selected speed.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
132992230.qxd 4/30/03 11:43 AM Pagina 9 (Nero/Process Black pellicola)