Zanussi ZWD 1261 W - Manual (Page 7)

7
Operating Sequence
Before the first wash, we recommend that you run a
cotton cycle at 95°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the main wash
compartment
of the dispenser drawer and start the
machine.
WASHING 5 KG OF WHITE COTTON AT 95°C
Suppose you have 5 kg of normally soiled laundry to
wash. It is white cotton and is suitable for high
temperature washing.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
.
If you wish to carry out the prewash, pour detergent into
the compartment marked
.
C0064
P0004
3. Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
“MAX” mark in the drawer).
Close the drawer gently.
4. Select the spin speed or option
NO SPIN
or R
INSE
H
OLD
Turn the dial to the required position.
5. Select the required programme
Turn the programme selector dial clockwise to the
programme B or A (if you wish to perform a prewash).
P1006S
B
45
0
55
0
65
0
750
850
10
00
12
00
spi
n no hold
rinse
C0065
132986760.qxd 31/03/2005 09:41 Pagina 7 (Nero/Process Black pellicola)