Operating instructions – Zanussi SD 2811 W User Manual

Page 5

Advertising
background image

5

Congratulations on your new

purchase

We recommed that you read these instructions care-

fully in order to quickly become familiar with your

new appliance.
A good appliance, which is used properly, will

serve you for many years.

Unpacking the appliance

Dispose of packing materials in accordance with

local regulations and with due regard to safety. Risk

of suffocation!.
Check the spin dryer for any transport damages,

which must be reported to the retailer or delivery

company responsible within 7 days.

Preparation for Use

1. Put the operating lever in the “OFF” (0)

position.
2. Open the lid.
3. Remove the transport safeguard from inside

the spin drum.

4. We recommend that the spin drum be wiped with

a wet cloth using a solution of water and mild

washing up liquid. Before using

for the first time.

5. Place the spin dryer on a level floor at a

distance of about 50 cm away from the

wall or other objects. Never balance out

irregularities in the floor surface by laying

wood, paper or similar materials under the

appliance.

Loading the machine

1. Place a sufficiently large container for excess

water under the outlet spout.

2. Plug the appliance in to a mains socket

(please observe the Points of Safety).

3. Place each article of laundry singly in the

spin drum. Distribute the washing evenly

in the drum and press down firmly, so as to

avoid leaving empty spaces (and thus avoiding

excessive vibration of the machine during

operation).

4. Press the loaded washing down, so that

there is a gap of at least 3 cm between the

washing and the top edge of the drum.

Lastly, cover the washing with a cloth, the ends

of which should be tucked well down inside the

drum, so as to avoid items of washing being

catapulted out during operation.

5. Close the lid.

Switch on the appliance

Turn the operating lever to the right as far as it

will go to the “ON” (I) position.
The spin dryer is now in operation and water flows

out of the outlet spout.

Spin Drying Times

• For normal washing: 3-5 minutes.

The residual moisture amounts to:

approx: 65% in machines with a spin speed of

1400

rpm;

approx: 40% in machines with a spin speed of

2800

rpm;

• For washing which requires no ironing:

15-30 seconds max.

Switch off the appliance

When water ceases to flow out of the outlet spout,

or when the spin process is to be terminated, turn

the operating lever back to the left to the “OFF” (0)

position.
When the drum has come to a standstill, open the

lid. A special safety device prevents the lid being

opened before the drum has stopped spinning.

Never force the lid open

Remove the laundry from the drum.
Gently tilt the spin dryer forward, so that any

remaining water can flow out of the outlet spout.
Switch off the power supply. Pull out the plug.

A

B

Operating Instructions

C

D

A

E

E

Advertising