Yamaha GX707 - Manual (Page 19)

E
-9
English
DIGITAL OUT
OPTICAL
SUBWOOFER
OUT
OUT
IN
VCR
VIDEO
R L
OUT
IN
AUX/MD
SEE
FOR
REAR R
CENTER
REAR :
R
VIDEO SIGNAL
MONITOR
OUT
FREQUENCY STEP
50 K H Z 9 K H Z
100 K H Z 10 K H Z
FM AM
DIGITAL OUT OPTICAL
ANTENNA
FM GND AM
75 UNBAL.
ANTENNA
FM GND AM
75 UNBAL.
ANTENNA
FM GND AM
75 UNBAL.
FREQUENCY STEP 50 K H Z 9 K H Z
100 K H Z 10 K H Z FM AM
(1)
(2)
Preparations and connections
■ Antenna connection
(1) Supplied FM antenna
Connect the FM antenna wire to the corresponding terminal and
direct it to the direction where the strongest signal can be received.
(2) Supplied AM loop antenna
Connect the AM loop antenna wires to the corresponding
terminals. Position the AM loop antenna for optimum reception.
Notes
• When static is still heard even after adjusting the position of the AM loop
antenna, try reversing the wire connections (from the right terminal to
the left one, and vice versa).
• The AM loop antenna should be placed apart from the main unit. The
antenna may be hung on a wall.
Using an external antenna
• If you need better reception, use an external FM antenna instead
of an indoor FM antenna. Consult your dealer.
• Use an external AM antenna if you need better reception.
Consult your dealer.
■ Connecting external components
This system can be connected with external audio and video
components. Make connections between this system and the
components using RCA pin plug connector cables, by correctly
connecting
L (left) to L and R (right) to R . Also, refer to the
owner’s manual for the component to be connected to this system.
* A digital-to-digital recording is possible from a CD played on
the built-in CD player to an MD (or tape) on an external MD
recorder (or DAT) by connecting the
DIGITAL OUT
(OPTICAL) terminal on the rear of the main unit to the MD
recorder (or DAT).
TV monitor
VCR
LD/DVD player, etc.
MD recorder, etc.