Muratec MX-2030 - Manual (Page 134)

3-52 F
AXING
3
Fax forwarding is now set.
Press [Reset] to return to the standby mode.
Alternative
There is another useful method to turn fax forwarding [ON] and [OFF] . This set-
ting links to the setting for “Turning fax forwarding ON or OFF”.
NOTE: To turn fax forwarding [ON], you must register at least one transfer rule.
1
Press [FAX] to display the Fax standby mode.
2
Press [Others].
3
Press [FaxForward] to set the fax forwarding to [ON].
(When “All” tab is selected)
NOTE: You can assign [FaxForward] to the soft key. See “Soft keys” on page 10-2.
4
Fax forwarding is now set.
Press [Reset] to return to the standby mode.