3Com PalmPilot Professional Handbook - Manual (Page 55)

Chapter 3: Reference page 51
Tap here
Tap to select
a command
The following commands are available:
■ Wait For. The Wait For command tells your PalmPilot to wait
until specified characters are sent by the TCP/IP server it is
connecting to before executing the next command.
■ Send. The Send command transmits specified characters to
the TCP/IP server to which you are connecting.
■ Send CR. The Send CR command transmits a carriage return
or LF character to the computer to which you are connecting.
■ Send UserID. The Send UserID command transmits the
User ID information entered in the User ID field of the
Network Preferences screen.
■ Send Password. The Send Password command transmits
the Password entered in the Password field of the Network
Preferences screen. If you did not enter a password in the
Password field, this command will prompt you to enter one.
The Password command is usually followed by a Send CR
command.
■ Delay. The Delay command tells your PalmPilot to wait a
specified number of seconds before executing the next
command in the login script.
■ Get IP. The Get IP command reads an IP address and uses it
as your PalmPilot organizer’s IP address. This command is
used with SLIP connections.
■ Prompt. The Prompt command opens a dialog and prompts
you to enter text of some kind (for example, a password or a
security code).