3M MPro110 - Manual (Page 4)

3M ™ Micro Professional Projector MPro110
4 © 2008 3M. All Rights Reserved.
Op
er
at
or
’s
Gui
de
m Warning
To reduce the risk associated with hazardous voltage:
Do not modify this product in any way. Use only 3M approved replacement •
components.
Do not attempt to service this projector other than battery replacement. There are
•
no user serviceable parts other than the battery. Service to be performed only by a
3M-authorized service provider using 3M-approved system components.
Do not use the wall power supply in a wet environment.
•
Do not use with a damaged wall power supply. Replace damaged part prior to use. •
To reduce the risk associated with fire and explosion:
Do not immerse the projector or battery in any liquid or allow either to get wet. •
Use only wall power supply and Li-Ion battery provided. •
Do not disassemble, short or expose the battery to high temperature. •
Do not overcharge or rapidly discharge the battery. •
Do not dispose of the battery by incineration or fire. •
Do not operate this projector in any environment above 100°F (38°C). •
Do not expose the projector or battery to direct sunlight in a closed space such as •
a vehicle.
To reduce the risks associated with driver distraction in a moving motor vehicle:
Do not use this projector in a moving motor vehicle. •
m Caution
To reduce the risk associated with environmental contamination:
Dispose of all system components in accordance with applicable government •
regulations.
To reduce the risks associated with LED visible bright light:
Do not stare directly into the LED light beam. •
To reduce the risks associated with tripping and falling:
Position the charging cord and data cables so that they can not be tripped over. •
SAVE THESE INSTRUCTIONS