3Com 3CRWE754G72-A - Manual (Page 41)

Wireless 41
■ 64-bit WEP (see page 42 )
■ WPA (with RADIUS Server) (see page 43 )
Select the required value from the drop down list, and press Apply.
Disabled In this mode, wireless transmissions will not be encrypted, and will be
visible to everyone. However, when setting up or debugging wireless
networks it is often useful to use this security mode.
WPA-PSK (no server) Figure 26 WPA-PSK (no server) Screen
WPA (Wireless Protected Access) provides dynamic key changes and
constitutes the best security solution. In a wireless network where not all
devices support WPA, WEP (Wired Equivalent Privacy) should be used.
1 Enter the pre-shared key in the Pre-shared Key (PSK) field. The pre-shared
key is a password, in the form of a word, phrase or series of letters and
numbers. The key must be between 8 and 63 characters long and can
include spaces and symbols.
Note that each client that connects to the network must use the same
key.
2 Click Apply.