3M MP8740 - Manual (Page 11)

3M ™ Multimedia Projector MP8740 © 3M 1999
ENGLISH
Factory Default Setting:
1. Highlight SETUP option.
2. To reset the entire SETUP menu
• Press the RESET button.
• Select DEFAULT or CANCEL.
3. To reset a single item from SETUP menu
• Select the adjustment item (brightness, contrast...)
• Press the RESET button. Only the selected item resets.
S E T U P I N P U T I M A G E O P T .
RESET ‘SETUP’
DEFAULT
CANCEL
VOL
B R I
CON
SHA
COL
T I N
C O L O R B A L
Section 4: Adjustment and Functions
4.1 Menu Navigation
1. Press the MENU button on projector or remote control MENU button.
On-screen menus are displayed on the screen.
2. Select the menu to be adjusted using the MENU ( ) buttons or DISC PAD.
Selected Menu is highlighted.
3. Select the item to be adjusted using the MENU ( ) buttons or DISC PAD.
Highlighted items may be adjusted.
✔ Note
Separate settings are provided for the VIDEO1, VIDEO2, RGB1 and RGB2 input terminals. Adjustments are
saved after power off.
MENU RESET
8
Figure 4.1 Menu Button
Figure 4.2 Default Settings