3M Volition VOL-1081 - Manual (Page 7)

Page 7
Desktop Installation
ÿ
Set the Switch on a clean, smooth, level, and sturdy surface with a power outlet
nearby.
ÿ
Make sure there is enough clearance around the Switch to allow attachment of
cables, power cord and air circulation.
Attaching Rubber Feet
ÿ
Make sure the surface on the bottom of the Switch is grease and dust free.
ÿ
Remove adhesive backing from the rubber feet and apply them to each corner on
the bottom of the Switch, to minimize shock and vibration.
Power On
ÿ
Connect the power cord to the power socket on the rear panel of the Switch.
ÿ
Connect the power cord to any power outlet in the range 100-240 V, 50~60Hz.
ÿ
Check that the power indicator on the front panel is on.