3M MP8630 - Manual (Page 7)

© 3M 1997 3M ™ Multimedia Projector MP8630
2.2 Main Unit Identification
Speakers
Handle
Cooling fan
(exhaust)
Remote control
sensor
INPUT button
To select the input source.
Each time this button is pressed, the input source
is changed in sequence as shown below.
RGB1
RGB2 VIDEO1 VIDEO2
STANDBY / ON
button
Power ON/OFF button.
OFF sets the unit in
standby mode.
TEMP Indicator
MUTE button.
ZOOM button
Adjusts picture size.
FOCUS button
Adjusts focus.
MENU button
RESET button
Resets unit to factory
settings.
LAMP indicator ON indicator
VIDEO input terminal
S-VIDEO input terminal
VIDEO input terminal
AUDIO L/R input terminal
MAIN POWER switch
Main power ON/OFF switch.
: OFF
 : ON
RGB input terminal
RGB input terminal
AUDIO input terminal
Stereo mini jack
RGB output terminal
RGB output terminal
AUDIO output terminal
(RGB/VIDEO)
Stereo mini jack
CONTROL terminal
D-sub 15pin terminal
AC IN socket
Connect the provided power cord.
Cooling fan
(inside) Remote
control sensor Lens
7
Lens shutter