3M MP8790CN - Manual (Page 24)

23
• May not function properly with some input signals.
• This function takes about 10 seconds to display an image.
NOTES
ADJUSTING SCREEN WITH ONE-TOUCH
1
Press the ONE TOUCH button
You can activate the following functions just by
pressing the ONE TOUCH button:
(1) Signal search: Cycle through input signals, displaying
the images of retrieved signals. If no signal is found,
returns to the signal that was selected before the search
was begun.
(2) Automatic adjustment: In RGB mode, automatically
adjust the picture position and size; for VIDEO input,
automatically select the signal mode. ( )
(3) Automatic keystone distortion correction: This is only
performed if ONE TOUCH of the AUTO menu is set to
TURN ON. When performed, the unit automatically corrects
vertical keystone distortion due to the (forward/backward)
setup angle of the main unit. ( )
• When BNC (RGB) is selected:
RGB BNC(RGB) DVI
S-VIDEO VIDEO COMPONENT VIDEO
RGB BNC(COMPONENT) DVI
S-VIDEO VIDEO COMPONENT VIDEO
• When BNC (COMPONENT) is selected:
DOWN
BLANK
ASPECT
PUSH
LASER
FOCUS
ENTER
ON
OFF
ESC MENU RESET
POSITION
MAGNIFY VOLUME
MUTE
WIRELESS KEYSTONE
FREEZE
ONE TOUCH
AUTO PinP
ZOOM PAGE ONE TOUCH