Dremel Moto-Saw - Manual (Page 14)

9. Do not push your work piece too hard against the saw
blades. These blades are for delicate use. Therefore it
is important that the blade has time to cut the materials.
Excessive pressure on the work piece will result in early
blade snapping.
10. Before beginning work on your project, make a few practice
cuts on scrap material.
HanD-HELD MODE
1. Keep pressing the Quick Release Button while detaching the
Moto-Saw unit from its base. PICTURE 13
2. Once the tool is detached, the Moto-Saw can be held in your
hand. PICTURE 14
3. While cutting in hand-held mode, make sure you have a firm
grip on the tool. PICTURE 14
4. Try to line up the unit’s surface against the bottom of your
work piece to reduce vibration. PICTURE 15
USEfUL HinTS anD TiPS
For useful hints and frequently asked questions, please visit
www.dremel.com.
MainTEnanCE
Preventive maintenance performed by unauthorized personnel
may result in misplacing of internal wiring and components which
could cause serious hazard. We recommend that all tool service
be performed by a Dremel Service Facility. To avoid injury from
unexpected starting or electrical shock, always remove plug from
wall outlet before performing service or cleaning.
CLEaninG
! WARNING
TO aVOiD aCCiDEnTS, aLwaYS
DiSCOnnECT THE TOOL anD/OR
CHaRGER fROM THE POwER SUPPLY BEfORE CLEaninG. The
tool can be cleaned most effectively with compressed dry air. Always
wear safety goggles when cleaning tools with compressed air.
Ventilation openings and switch levers must be kept clean and
free of foreign matter. Do not attempt to clean the tool by inserting
pointed objects through an opening.
! WARNING
CERTain CLEaninG aGEnTS anD
SOLVEnTS DaMaGE PLaSTiC PaRTS.
Some of these are: gasoline, carbon tetrachloride, chlorinated
cleaning solvents, ammonia and household detergents that contain
ammonia.
SERViCE anD waRRanTY
! WARNING
nO USER SERViCEaBLE PaRTS inSiDE.
Preventive maintenance performed by
unauthorized personnel may result in incorrect connection of internal
wiring and components which could cause serious hazard. We
recommend that all tool service be performed by a Dremel Service
Centre. SERVICEMEN: Disconnect the tool and/or charger from the
power source before servicing.
This DREMEL product is guaranteed in accordance with statutory/
country-specific regulations; damage due to normal wear and tear,
overload or improper handling are excluded from the warranty.
In case of a complaint, send the undismantled tool or charger and
proof of purchase to your dealer.
COnTaCT DREMEL
For more information on the Dremel product range, support and
hotline, go to www.dremel.com.
Dremel Europe, P.O. Box 3267, 4800 DG Breda, The Netherlands
ÜBERSETzUnG DER
ORiGinaLBEDiEnUnGSanLEiTUnG
VERwEnDETE SYMBOLE
LESEn SiE DiESE anwEiSUnGEn
TRaGEn SiE aUGEnSCHUTz
TRaGEn SiE GEHÖRSCHUTz
DOPPELT iSOLiERT (KEin SCHUTzLEiTER
ERfORDERLiCH)
ELEKTROwERKzEUGE, zUBEHÖR UnD
VERPaCKUnGSMaTERiaL niCHT MiT DEM
HaUSMÜLL EnTSORGEn
aLLGEMEinE SiCHERHEiTSHinwEiSE
fÜR ELEKTROwERKzEUGE
! WARNUNG
LESEn SiE aLLE
waRnHinwEiSE UnD aLLE
anwEiSUnGEn. Nichtbeachtung der Hinweise und Anweisungen
kann zu elektrischem Schlag, Bränden und schweren Verletzungen
führen.
Bewahren Sie alle Warnungen und Anweisungen für die Zukunft
auf.
Die Bezeichnung Elektrowerkzeug in den Warnhinweisen bezieht sich
sowohl auf Werkzeuge, die mit Netzspannung betrieben werden
(Werkzeuge mit Netzkabel), als auch auf akkubetriebene Werkzeuge
(Werkzeuge ohne Netzkabel).
DE
14