Festool CDD 12 fx User Manual

Page 7

Advertising
background image

7

5.3.2 Changing tools

- Pull the unlocking ring (2.4) back and remove

the tool and/or insert the new tool.

5.4

Tool holding fixture in the drill spindle

Bits can be fitted directly in the hexagon socket

holder of the drill spindle (2.11) to make the

machine lighter and shorter.
6

Accessories, tools

The accessory and tool order number can be

found in the Festool catalogue or on the Internet

under "www.festool.com".
Bit depot

Attachments which are used on a regular basis,

as for example the chuck key (4.2), bit extender

(4.3) or different bits (4.5), can be clipped onto

the bit depot (4.1).

The bit depot can be snapped into the bottom

of the drill/screwdriver with its mounting lugs

(4.6). When the mounting lugs are inserted into

the corresponding holes (4.4) and the magazine

is slid sideways the contour of the case aligns

with the contour of the magazine.

The spring loaded catch of the bit magazine can

loosen on impact of drill/screwdriver.
7

lnstructions on application -

maintenance - care

Please pay attention to the following

instructions. Otherwise there is a risk of damage

to the tool, charger or battery pack.

• Keep the air vents of the electronic equipment

and the charger clean to guarantee the air

circulation for cooling.

• Keep the connection contacts of electronic

equipment, charger and battery pack clean.

• Festool chargers and Festool battery packs

are designed for each other. Therefore, only

use Festool chargers to charge Festool battery

packs.

• By keeping the battery pack in a ready for use

charger, the battery pack will be kept in a state

of readiness by float charging conservation.

• Do not keep discharged battery pack

(maximum one month) attached to charger

whenever charger is detached from the power

supply (danger of deep discharging).

• A new battery pack or a battery pack not used

for a longer period of time reaches it's full

capacity after about 5 charging and discharging

cycles.

• Battery packs should, before charging, be fully

discharged if possible. Continuous starting of

the charging process shortens the lifespan of

the batteries.

• A considerably reduced time of operation per

charging shows that the battery pack is used

up an should be replaced by a new one.

• Store battery packs at ambient temperatures

between 0°C and 35°C.

• All maintenance and repair work, requiring

dismantling of equipment, may only be

performed by an authorised after-sales service

workshop.

8

Recycling battery packs

Never throw spent battery packs into

domestic waste containers! Return spent or

defective battery packs to dealers, the Festool

after-sales service department or approved waste

disposal facilities. This ensures that they are

correctly recycled.
9

Warranty

Festool warrants, that all Festool portable power

tools will be free from defects in materials and

workmanship for a term of one year from the date

of procurement. Festool makes no other warranty,

express or implied, for all Festool portable power

tools. No agent, representative, distributor, dealer,

or employee of Festool has the authority to

increase or otherwise change the obligations or

limitations of this warranty. The obligations of

Festool in its sole discretion under this warranty

shall be limited to the repair or replacement of

any Festool portable power tool which is found to

be defective as packaged with this User Manual.

Excluded from the coverage under this warranty

are: normal wear and tear; damages caused by

misuse, abuse or neglect; damage caused by

anything other than defects in material and

workmanship.
Returning product: Call us for authorisation.

For product returns: (888) 463-3786

For service or repairs: (800) 554-8741

We will supply you with the correct address for

your return. This is important because not all types

of returns are to be shipped to the same address.

IN NO EVENT SHALL FESTOOL BE LIABLE FOR

ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES

FOR BREACH OF THIS OR ANY OTHER WARRANTY,

EXPRESSED OR IMPLIED WHATSOEVER.
ALL WARRANTIES IMPLIED BY STATE LAW,

INCLUDING THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, ARE HEREBY LIMITED TO

THE DURATION OF ONE YEAR.

Some states in the U.S. and some Canadian

provinces do not allow the limitations on how long

an implied warranty lasts, so the above limitation

may not apply to you. With the exception of any

warranties implied by state or province law as

hereby limited, the foregoing express limited

warranty is exclusive and in lieu of all other

warranties, guarantees, agreements and similar

obligations of Festool.

This warranty gives you specific legal rights and

you may also have other rights which vary from

state to state in the U.S. and province to province

in Canada.

Advertising