Festool DRC 18-4 - Manual (Page 11)

DRC 18/4
11
GB
1.3 Emission levels
Levels determined in accordance with EN 60745 are
typically:
Vibration emission value a
h
(vector sum for three
directions) and uncertainty K measured in accor-
dance with EN 60745:
The specified emissions values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
2 Symbols
3 Technical data
* Speed specifications with fully charged battery
pack.
** The maximum speed is reduced in the lower
torque stages.
Sound pressure level L
PA
= 73 dB(A)
Sound power level L
WA
= 84 dB(A)
Uncertainty K = 3 dB
Wear ear protection.
Drilling in metal a
h
= 5,6 m/s
2
K = 1,5 m/s
2
Fastening a
h
< 2,5 m/s
2
K = 1,5 m/s
2
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
Wear protective gloves.
Wear protective goggles.
Do not throw in the household waste.
Cordless drill DRC18/4
Motor voltage 18 V
Idling speed* 1st gear 0 - 400 rpm
2nd gear 0 - 850 rpm
3rd gear 0 - 1850 rpm
4th gear 0 - 3800 rpm
Torque for easy/tough fastening
applications 28/50 Nm
Adjustable torque** 1st gear 0,75 - 12 Nm
2nd gear 0,6 - 7,5 Nm
3rd gear 0,55 - 5 Nm
4th gear 0,5 - 2,7 Nm
Chuck clamping range 1,5 - 13 mm
Drill diameter max. Wood 50 mm
Metal 12 mm
Fastening in pine max.  10 mm
Tool holder in drill spindle 1/4 ’’
Weight without battery pack with
Centrotec 1,9 kg
Charger TCL 3
Mains voltage (input) 220 - 240 V ~
Mains frequency 50/60 Hz
Charging voltage (output) 10.8 - 18 V=
Rapid charging max. 3 A
Conservation charging, inter-
mittent (NiCd, NiMH) approx. 0.06 A
Charging times for BP, BPS and BPC battery
packs
Li-ion 1.5 Ah, 80 %/100 % approx. 25/35
min.
Li-ion 3.0 Ah, 80 %/100 % approx. 55/70
min.
Li-ion 4.2 Ah, 80 %/100 % approx. 70/90
min.
Permitted operating tempera-
ture range -5 °C to + 45 °C
Temperature monitoring via NTC resistor
Safety class / II
Battery pack BPC 18
Voltage 18 V
Capacity 3,0 Ah
Weight 0,7 kg
Cordless drill DRC18/4