Gembird NSW-R4 - Manual (Page 24)

24
GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
NSW-R4 WIRELESS BROADBAND ROUTER, 300M
4.1.2 Access Control
The Wireless MAC Address Filtering feature allows you to control which
wireless stations are allowed to be connected to the router.
Mode: If you choose 'Allowed Listed', only those clients whose wireless
MAC addresses are in the access control list will be able to connect to your
Access Point. When 'Deny Listed' is selected, these wireless clients on the
list will not be able to connect the Access Point. The MAC Address format is
001122334455.
4.1.3 WDS
Wireless Distribution System uses wireless media to communicate with
the other APs. To do this, you should first set AP Mode to WDS or AP+WDS
in the basic settings, then enable WDS function and set another AP MAC
address which you would like to communicate with. The WDS supports WEP
and PSK security mode. Of course in order to make the APs work, you have
to assign for them the same channel and security mode.