Gembird STR-FFB2 - Manual (Page 6)

6
GEMBIRD EUROPE B.V. http://www.gembird.eu
STR-FFB2 USB FORCE FEEDBACK STEERING WHEEL
Functions Description
Mode change:
DIGITAL (LED off) -> ANALOG (RED LED on) -> NEGCON (RED LED
flashes)
PROGRAM function without memory
• Under the NEGCON mode, there is no PROGRAM function
• PROGRAM sourcing buttons includes: buttons 1-8, left/right hand
paddles
• The programmable key includes: left/right foot pedals, up/down gear
stick
• PROGRAM method:
o
Press and hold the 9+10 buttons for 3 seconds, the green LED
is on
o
Press the programmable button, the green LED will be flashing
o
Press the program sourcing button, the green LED will be off,
PROGRAM setup is over
• PROGRAM clear up method:
o
Press 9+10 buttons for 3 seconds, the green LED is on
o
Press the programmable key, the green LED will be flashing
o
Press the programmable key once more, green LED will be off,
PROGRAM is cleared up
Three kinds of directional sensitivity setup function
• Press 9+10 buttons for 3 seconds, the green LED is on
• Then press the 9 button, it will show the present sensitivity status