Edimax Technology NS-2502 - Manual (Page 11)

10
4) Plug the power adaptor to the storage server and connect the storage server to your
network as shown in the setup diagram below.
5) Power on the storage server by pressing the power switch of the storage server on as
shown in the setup diagram below.
6) When the Power LED is steady lit, the storage server is ready.
7) There are two methods to setup the storage server: (1) Use the Windows-based
Storage Server Wizard utility to do the basic setup. Please refer to Quick Installation
Guide; (2) Use the Web-based GUI to do the advanced setup, just go to the next step.
The disk drawer is
not safely installed