Edimax Technology IC-3010 - Manual (Page 31)

31
2.2.2 RTSP
Before using RTSP player to view video image from camera, you will need to configure the
RTSP settings in this menu.
Item Description
Enable RTSP
You can s elect „Enable‟ when you wish to use RTSP player to view
video image from camera.
RTSP Port
This option allows you to enter RTSP port. The default value of
RTSP port is 554. Please make sure the RTSP port applied on the
RTSP player shall be same as the RTSP port applied on the IP cam.
RTSP Path
You can input RTSP path here. Please make sure the RTSP path
applied on the RTSP player shall be same as the RTSP path applied
on the IP cam.
RTSP Port
Range
You can input the RTSP port range here. The default value of RTSP
port range is 5000 -60000