Edimax Technology AR-7211B - Manual (Page 46)

45
3-6-6-7 Service \ ACL
Click ACL in the sub-menu to open the screen of Fig 3.7.9. In this page, you can
configure the IP Address for Access Control List. If ACL enabled, only the effective IP in ACL
can access ADSL Router.
Step 1: If you want to enable ACL, please choose "Enable" then press "Apply Changes";
Step 2: Config Access Control List;
Note: If you check "Enable" in ACL Capability, please make sure that your host IP is in
ACL List before it takes effect
Fig 3.7.9