Edimax Technology AR-7084gB - Manual (Page 41)

33
Parameter Description
MBS MBS (Maximum Burst Size) refers to the maximum
number of cells that can be sent at the peak rate. Type
the MBS, which is less than 65535.
z Encapsulation
The router can be connected to your service provider in any of the following ways.
Parameter Description
Dynamic IP Address Obtain an IP address automatically from your service
provider.
Static IP Address Uses a static IP address. Your service provider gives a
static IP address to access Internet services.
PPPoE/PPPoA PPPoE (PPP over Ethernet) and PPPoA (PPP over
ATM) are common connection methods used for xDSL.
Bridge Mode Bridge Mode is a common connection method used for
xDSL modem.
z Dynamic IP Address/Static IP Address/PPPoE/PPPoA/Bridge Mode
After you have selected the ISP Type, this web page will be varied depending on
the ISP Type you select. You have to continue setting some parameters. Please
refer to the following table for the explanation of each parameter.
Parameter Description
User Name Enter the username exactly as your ISP assigned.
Password Enter the password that your ISP has assigned to you.
Encapsulation Please check with your ISP the method of multiplexing.
In Bridge Mode, please select “1483 Bridge IP LLC” or
“1483 Bridge IP VC-Mux”. In PPPoE/PPPoA mode,