Edimax Technology EW-7722UTn - Manual (Page 30)

27
authentication, please click on ‘Use 802.1x’ box, then click ‘802.1X’
tab to set 802.1x parameters.
To set 802.1x authentication for the access point. Please click ‘802.1X’ tab:
Here are descriptions of every setup item:
Item Name Description
EAP Method
Select 802.1x EAP method from dropdown menu. Please ask the
administrator of the access point you wish to connect to select a
correct EAP method.
Tunnel
Authentication
Select 802.1x tunnel authentication type from dropdown menu.
Please ask the administrator of the access point you wish to connect
to select a correct tunnel authentication method. This pull down
menu is only available when authentication type you use is 'PEAP',
‘TLS / Smart Card', or 'TTLS'.
When you use 'EAP-FAST' as authentication type, the protocol
setting is always 'Generic Token Card' and can not be changed. You
also need to select ‘Soft Token’ or ‘Static Password’ as password in
‘ID \ Password’ setting.
’EAP Fast’ authentication type also have a sub-menu to set EAP
fast-specific parameters: