Edimax Technology HP-5001k - Manual (Page 2)

NETWORK SETUP DIAGRAM AND RELATED PRODUCTS
An example of how the HP-5001 can be set up:
• Plug the HP-5001 to a power outlet and connect the HP-5001 to your broadband router.
• Plug another HP-5001 to another power outlet and connect the HP-5001 to your computer’s Ethernet port.
FEATURES AND TECHNICAL SPECIFICATIONS
HARDWARE INTERFACE MODULATION SCHEMES POWER
1 power jack and 10/100/1000Mbps Ethernet LAN ports
LED indicators: power, Ethernet, and power line link
Reset button, Group button and Standby button 4096/1024/256/64/16/8-QAM, QPSK,
BPSK, and ROBO modulation schemes 100-240V AC, 50-60Hz
Consumption : 6W (Typical)
or 1 W (Standby mode)
SECURITY & SUPPORT OS & PROTOCAL MODULATION BAND & HARDWARE HUMIDITY & TEMPERATURE
128-bit AES link encryption
Utility supports Windows 2000/XP/Vista/7
HomePlug AV 1.0 / IEEE1901 for PowerLine and
IEEE802.3/802.3u/802.3ab for Ethenrnet 2-68MHz
16Mbits Flash / 256Mbits SDRAM 10-90%
(non-condensing)
0-40 degrees Celsius
FUNCTIONS DIMENSION & WEIGHT CERTIFICATIONS
Power line coverage range up to 300 meters
Supports IGMP and IPv6
Integrated Quality of Service ( QoS ) Enhancement 90 x 55 x 33mm
120g CE, FCC