Edimax Technology IC-3115W - Manual (Page 27)

26
Authentication Select authentication type:
None: No encryption
WEP: Use WEP encryption
WPA-PSK: Use WPA with PSK encryption.
WPA2-PSK: Use WPA2 with PSK
encryption.
The authentication type you select here
must be identical to the access point’s
setting.
Encryption Type Select wireless encryption type. This
option will vary depending on the
authentication type of the network you
wish to connect.
The encryption type you select here must
be identical to the access point’s setting.
WPA Pre-shared
Key Input the WPA pre-shared key here, it
must be identical to the access point’s
setting.
(This field is not available when the
authentication type is none or WEP).
WEP Key Format Select the WEP key’s format: Hex or ASCII.
This setting must be identical to the setting
of the network you wish to connect to.
WEP Key length Select the WEP key’s length: 64 or 128-bit.
This setting must be identical to the setting
of the network you wish to connect to.
WEP Key Input the WEP key here.