Edimax Technology IC-1520POE User Manual
Page 10
6
1.5 Descriptions for LED Indicators
LED Name
Status
Description
Off
Network cable is disconnected
On
Network cable is connected
LAN
Flash
Transferring data via LAN port
Off
No wireless LAN activity
WLAN
On
Transferring data via wireless LAN
Off
Camera is not powered (camera off)
Power
On
Camera is correctly powered (camera on)
1.6 Camera Installation
Please follow the following instructions to set your IP camera up.
1. Unpack the product package and check if anything’s missing.
2. Connect the antenna to the antenna base, which is located at the top of this IP
camera.
Plug the power adapter to wall socket, and connect the power connector to the
power jack located at the bottom of the IP camera.
3.
Connect the Ethernet cable to your local area network, and connect the other end
to the LAN jack of this IP camera.
NOTE: You can skip this step if you plan to use wireless LAN only.