Edimax Technology WP-S1100 - Manual (Page 63)

63
you may not have to set output power to 100%. This
will enhance security (malicious / unknown users in
distance will not be able to reach your wireless
router).
Turbo Mode Enhance the data transfer rate of LAN, default value is
‘Enable’, it’s recommended to set this option to
‘Enable’.
WMM The short of Wi-Fi MultiMedia, it will enhance the data
transfer performance of multimedia contents when
they’re being transferred over wireless network. If you
don’t know what it is / not sure if you need it, it’s
safe to set this option to ‘Enable’, however, default
value is ‘Disable’.
When you finish, please click ‘Apply’ button to save changes you made; to
discard changes, click ‘Cancel’ button. If you click ‘Apply’, you’ll see the
following message:
Click ‘Continue’ to continue on projector server setting, or click ‘Apply’ to
reboot projector server, and changes you made will take effect after projector
server rebooted.