Edimax Technology PS-1210MFn - Manual (Page 40)

35
6.3 Auto Connect List
To let the system occupy the MFP server automatically when you
want to print a document just like the behavior of using traditional
print server, you can add the MFP into your Auto Connect List. The
system will send the printing jobs to the MFP when the MFP
Server is idle and not being connected.
Tip:
If you have sent a printing job to the MFP while the MFP is
connecting by a user, you may be prompted that the device is not
found or the document is failed to print. It also happens in some
MFPs or printers even though the MFP is not connecting by a user.
Please follow the message to retry and the MFP will queue your
printing job in your computer spooler. The MFP Server will then
print the job after the MFP is idle or disconnected.
To add the MFP to the Auto Connect List, please follow the steps
below.
1. Click “Add” from the “Auto Connect List”.