Edimax Technology IC-7000PTn V3 - Manual (Page 30)

30
1.8 Log Onto Web Management Interface
Make sure the Network camera is correctly powered (Power LED is on), and
then launch Internet Explorer and type the IP address of the Network camera
in address bar of Internet Explorer. You should be prompted to input the user
name and password:
Default user name is „admin‟ and password is „1234‟. Click „OK‟ to continue
after user name and password has entered.
If you
‟re rejected, maybe the password has been modified previously. This
should not happen if this is a newly-purchased camera, however, if you get the
camera from someone else, the password would be changed. Please try to
obtain the correct user name / password, or you ‟ll have to reset the camera.