Edimax Technology EW-7612HPn - Manual (Page 35)

28
3.8 Software AP
You should click “ Mode “ and select “Access Point “ to enable Software AP mode.This adapter can run
as a wireless AP. The relative configurations of the AP including channel, SSID, WEP encryption and
so on are described as follows.
Parameter Description
SSID The SSID (up to 32 printable ASCII characters) is the unique
name identified in a WLAN. The ID prevents the unintentional
merging of two co-located WLANs.
The default SSID of the AP is Full Computer Name + “_AP“.
Wireless adapters connect to the AP should set up the same SSID
as the AP.
BSSID Display the MAC address of the adapter.
Associate Table All the wireless adapters connected to the software AP will be
displayed in the list.
Config Click “Config“ for setting more configuration of the AP.