Edimax Technology BR-6216Mg - Manual (Page 8)

8
2a) Windows 95/98/Me
1: Click the Start button and select Settings, then click Control Panel. The Control Panel
window will appear.
2: Double-click Network icon. The Network window will appear.
3: Check your list of Network Components. If TCP/IP is not installed, click the Add button to
install it now. If TCP/IP is installed, go to step 6.
4: In the Network Component Type dialog box, select Protocol and click Add button.
5: In the Select Network Protocol dialog box, select Microsoft and TCP/IP and then click the
OK button to start installing the TCP/IP protocol. You may need your Windows CD to
complete the installation.
6: After installing TCP/IP, go back to the Network dialog box. Select TCP/IP from the list of
Network Components and then click the Properties button.
7: Check each of the tabs and verify the following settings:
•
Bindings: Check Client for Microsoft Networks and File and printer sharing for
Microsoft Networks.
•
Gateway: All fields are blank.
•
DNS Configuration: Select Disable DNS.
•
WINS Configuration: Select Disable WINS Resolution.
•
IP Address: Select Obtain IP address automatically .
8: Reboot the PC. Your PC will now obtain an IP address automatically from your
Broadband Router
’s DHCP server.