Edimax Technology ET-950MCR - Manual (Page 2)

Step 3: Carefully locate the converter in the
bay cover.
Step 4: Press the converter gently and push it
to the left side to make sure it is fitted into the
bay cover.
Step 5: Slide the bay cover with the converter
into the slot of this chassis until it is fully fitted.
Step 6: Fasten the hand screw clockwise by
hand to make sure it is firmly fitted into this
chassis.
Connecting to Power (Power Supply)
To install a power supply to this chassis,
please slide the power supply to the chassis
and fasten the hand screw clockwise to the
chassis.
Technical Specifications
Capacity
16 bays for up to 16
Media Converters
Power
One hot-swappable power
supply
Optional second
hot-swappable power supply
Input: 90~260V/AC,
50~60Hz
Cooling Two internal cooling fans
Dimensions
440 Ч 300 Ч 130 mm
(L x W x H)
Operating
Temperature
0 to 55℃
Storage
Temperature
-20 to 70℃
Humidity
10 to 90% RH
(non-condensing)
Certifications FCC Class A, CE
Media Converter Chassis
Power Supply
Dimensions
150 Ч 180 Ч 90 mm
(L x W x H)
Operating
Temperature
0 to 50℃
Storage
Temperature
-20 to 70℃
Humidity
10 to 90% RH
(non-condensing)
Certifications FCC Class A, CE