Edimax Technology EN-9230TX-32 - Manual (Page 7)

4
4 Trouble-shooting
If you experience any problems with the adapter, please
make sure the appropriate driver is loaded, the proper
cable is connected to the adapter port and the
hub/switch complies with the adapter specification,
such as 10Mbps 10BaseT, 100Mbps 100BaseTX and
1000Mbps 1000BaseT, then check the LED.
The adapter provides LEDs to indicate network status.
„ Speed
The LED indicates the adapter is connected to
10BaseT, 100BaseTX, or 1000BaseT network. When
the light is OFF, it indicates that the adapter is
connected to 10BaseT network. When the light is ON
in green color, it indicates that the adapter is connected
to 100BaseTX network. When the light is ON in
amber color, it indicates that the adapter is connected to
1000BaseT network.
„ Link/Activity
The LED indicates if the UTP has been LINK ok or
not. When the light is OFF, it indicates that the UTP
port has not been connected or LINK not ok. When the
light is ON, it indicates that the UTP port LINK ok.
When the light is BLINKING, it indicates that there is
traffic flow on the network which the adapter is
connected to.
5