Edimax Technology BR-6315SRg - Manual (Page 49)

47
address you have to set this access point to “AP
Bridge-Point to Point mode”, “AP Bridge-Point
to Multi-Point mode” or “AP Bridge-WDS
mode”. You have to enter the MAC addresses
of other access points which will join the same
wireless network.
Set Security
Click the “Set Security” button, and then a
“WDS Security Settings” will pop up. You can
set the security parameters used to bridge
access points together here, when you set your
AP in AP Bridge mode. You can refer to section
4.3 “Security Settings” for detailed instructions.
Click <Apply> at the bottom of the screen to save the configurations. You can
now configure other advanced sections or start using the router (with the
advanced settings in place)