Using the projector server – Edimax Technology WP-S1300 User Manual
Page 11
Advertising
![background image](/manuals/233748/11/background.png)
11
Using the Projector Server
Press the
“Power” button at the front
of the projector server. You should
be able to see this image on the
screen.
Please wait for about 60 seconds for
the projector server to start up.
Projector server will acquire an IP
address from the DHCP server on
your LAN automatically, and the IP
address will be displayed at the
bottom-left corner of the display of
attached projector or monitor.
If there‟s no DHCP server on your
LAN, projector server will use
„192.168.2.10‟ as default IP address.
The projector server
‟s IP addresses
can be found on the lower-left corner
of the connected display.
The login code can be found on the
lower-right corner of the connected
display.
Advertising