Edimax Technology IC-3100W - Manual (Page 53)

52
Recording Time Select the duration you wish this camera to record image
when a motion is detected from dropdown menu.
Available options are 1, 2, 3, 4, and 5 (seconds).
Sending File
Type Select the file type that will be saved when a motion is
detected. Select ‘JPEG’ and a still picture in JPEG format
will be saved; and select ‘AVI’ to save a motion video clip.
Send snapshot
file to FTP Select ‘Enable’ to send the saved file to appointed FTP
server when a motion is detected, select’ Disable’ to
disable this function. You have to configure FTP server
parameters in ‘FTP Configuration’ menu first, so this
function will take effect (see below).
Send snapshot
file to E-Mail Select ‘Enable’ to send the saved file to appointed E-mail
address when a motion is detected, select’ Disable’ to
disable this function. You have to configure mail server
parameters in ‘FTP Configuration’ menu first, so this
function will take effect (see below).
SD Card Record Select ‘Enable’ to record detected motion to SD card (if
there’s one), and select ‘Disable’ to disable this function.
Storage File Type Select saving file type for motion detection: JPEG (still
picture) or AVI MPEG4 / AVI H264 (for motion picture).
Record File Size Input the maximum file size of saved file in Mbytes.
Maximum file size is 100.
Record to Folder Select ‘Enable’ to save file to a network folder which
supports SAMBA (also known as ‘Windows Network
Neighborhood’), select ‘Disable’ to disable this function.
Authentication If username and password are not required to write files
in specified folder, select ‘Anonymous’; if required, select
‘Account’.
User Name Input user name required by destination network folder.
Password Input password of the user name required by destination
network folder.
Samba Server Input the IP address or host name of network file server.
Shared Folder Input the folder name on file server.
Storage File Type Select saving file type for motion detection: JPEG (still
picture) or AVI MPEG4 / AVI H264 (for motion picture).
Record File Size Input the maximum file size of saved file in Mbytes.
Maximum file size is 100.
Click ‘Apply’ to save settings and make the new settings take effect.