Edimax Technology EW-7733UnD - Manual (Page 18)

5 (Security) Security mode. When nothing is displayed
here, means this network device does not
require security and anyone can connect to it.
6
(Signal
Strength) Shows the wireless signal strength in
percentage. Higher percentage means better
signal quality.
3. To connect to a wireless access point, double click on it:
4. If the wireless access point you wish to connect does not appear here, you
can click ‘Refresh’
button to scan for wireless access points again; if
the
wireless access point you’re looking for still not appear, try to move the
computer closer.
5.
You’ll be prompted with wireless access point’s encryption method (if any):
Click right arrow to continue. Generally you don’t have to change
encryption method, it will be detected automatically. If you selected a wrong
encryption method, connection will not be able to establish.