Edimax Technology WP-S1300 - Manual (Page 79)

3-6 Presentation Control
You can use this menu to control every connected user, and device who
should be active presenter here.
The description of every setting item will be described below:
Item Description
Administrator
mode
Check this box to enter „Administrator mode‟ (i.e. you
can control users).
Please note that when you change the status of
Administrator mode, projector server needs to reboot
and all connected users must reconnect to projector
server. You‟ll be prompted before projector server is
rebooting, and you can cancel rebooting.
Once enable Administrator mode, all presentation
procedure will be controlled in this UI, users can not
use any presentation function on their PC utility.
All connected users will be displayed in „User List‟: