Edimax Technology ES-3124RL User Manual
Page 4
3
LED Definition
Please refer to the following table for LED definition
24 Ports example
LED
Status
Operation
Steady Green
Power is on
Power
Off
Power is off
Steady Green
The port is connected
Blinking Green
The port is
transmitting/receiving data.
Link/Act
Off No
connection
Stations Connection
Connect each station to the switch by twisted-pair cable. Plug
one RJ-45 connector into a RJ-45 port of the switch, and plug
the other RJ-45 connector into the station’s network adapter.
Power on the switch and then system is ready. For cable
selection, refer to the following table.
Switches Connection
In making a switch interconnection, you could use any port to
connect another switch with straight or crossover cable. As all
the ports support auto MDI / MDI-X function, using a straight
cable to make a switch-to-switch connection is allowed.