Hama USB 3.0 Controller PCIe - Manual (Page 9)

9
• Close the case of your computer, and reconnect it to
power.
• Turn your computer back on.
PCIe Steckplatz / PCIe Slot
PCIe Express
Einsteckkarte /
Slot card
Slotblech /
Slot plate
Replacing the slot cover
(optional for use with a mini PC)
The slot cover is connected to the card with two screws.
Loosen the screws carefully using an appropriate screw-
driver. Take special care not to damage the card.
After you have removed the screw and the slot cover,
replace it with the low-profi le slot cover. Attach the cover
using the two screws and tighten them carefully. Install
the card in your computer as described in the section on
hardware installation.
Safety instructions:
Keep this device away from heaters and radiators and
free of dust or moisture when operating.
Power supply (optional)
The card is equipped with an internal four-pin power
connection.
You usually connect the power connection to you
computer’s internal power supply if you use USB devices
that do not have a power supply of their own.
Carefully insert a free power supply cable from your com-
puter into the power connection. Ensure that the plug is
turned correctly when you insert it. With the right polarity,
it can be inserted without exerting much force.
Caution: ! If the plug is turned the wrong way, the power
supply, computer or card may be damaged.
Hama GmbH & Co KG accepts no liability for damage that
arises from a failure to observe these instructions.
1 2
3 4
4 3
2 1
!
Support information:
Contact your dealer or Hama Product Consulting if you
have a faulty product:
Support Hotline – Hama Product Consulting:
(Languages: German and English)
Tel.: +49 (0) 90 91 / 502 – 115
Fax: +49 (0) 90 91 / 502 – 272
E-mail: mailto:[email protected]
Product information and new drivers can found on the
Internet at www.hama.com
00053121man_V2_cs_de_el_en_es_fi_fr_hu_it_nl_pl_pt_ro_ru_sk_sv_tr.indd 9 30.03.12 09:34