Hama VMAA18 - Manual (Page 6)

ENGLISH
Step 2: Mounting the Monitor Brackets to a television with a curved back or any other obstruction.
First, determine the diameter of the Bolt (t,u,v,w) your TV requires by hand threading them into the threaded insert on the back of the TV.
If you encounter any resistance stop immediately! Once you have determined the correct diameter, see the appropriate Diagram below. You
will thread the Bolt through the appropriate Lock Washer (x,y,z,aa), a Washer (dd,ee), the Monitor Bracket (e), a second Washer (dd - M4/M5
diameter only), a Spacer (bb,cc), and finally into the TV. Make sure the Monitor Brackets are vertically centered and level with each other.
Repeat the process until each Monitor Bracket is secured to the TV with 2 bolts.
M4 Diameter Bolt M6 Diameter Bolt
t v
x z
dd ee
e e
dd
bb cc
Diagram 2
M5 Diameter Bolt M8 Diameter Bolt
u w
y aa
dd ee
e e
dd
bb cc
VMAA18ins_010606_ML.indd 6 1/13/06 3:04:53 PM