Hama JFV65E - Manual (Page 11)

Step 13: Add Back Panels
Insert the Back Panel (aa) by lifting it up into the upper channel, and setting it down into the lower channel as shown in Diagram 13.
After inserting the first Back Panel, slide it all the way to the left. After inserting the second Back Panel slide it all the way to the right.
Then, insert the last Back Panel into the middle slot.
Note: The last Back Panel that is inserted should go in the middle. Insert the outer two first. Make sure the left and right Back
Panel slide into the channel in the Outside Panels.
Diagram 13
aa
Step 14: Add Doors
Add 2 Door Protectors (k) to each side of the door as shown in the detailed View of Diagram 14. Hold the Door (z) so the smooth side
of the glass is facing out. Then, insert the Door so that the pegs on the top of the door are inserted into the Channel in the Top (o) and the
bottom wheels fit on the Track on the Bottom (p) as shown in Diagram 14. The doors should slide easily on the track.
Detailed View
Diagram 14
k
z
track
Note: If Doors (z) do not slide easily, make sure wheels are sitting properly on the track.
ENGLISH