Tanita BC-730 - Manual (Page 5)

3
You can change the weight unit by using the switch on the back of the scale.
Note:
If weight mode is set to pounds or stone-pounds, the height programming mode will be automatically set to feet and inches.
Similarly, if kilograms is selected, height will be automatically set to centimeters.
Note:
• After you replace the batteries or if you want to reset date and time, press and hold the Arrow (recall) button to begin the date and
time programming process. Replacing the batteries will cause the loss of date and time settings.
• 60 seconds or more of inactivity will cause automatic shut off during this process. No data will be saved as a result.
• If you make a mistake or wish to turn the unit off before you complete the programming, press the OFF button to turn the unit off.
No data will be saved as a result.
SETTING (RESETTING) DATE AND TIME
CHANGING THE WEIGHT MODE
Note: For use only with models containing the weight mode switch.
1. Set Date
Insert batteries into the scale and then press any button to
start the Year setting. Press the <Up/Down> buttons to set
year and then press SET button. The unit will beep once
to confirm.
2. Set Hour
Press <Up/Down> buttons to set hour and then press SET
button.
The unit will beep once to confirm.
3. Set Minute
Press <Up/Down> buttons to set minute and then press
SET.
The unit will beep twice to confirm the programming.
The power will then shut down automatically.