Tanita BC-1000 - Manual (Page 6)


Using Tanita Wireless Remote Tabletop Display
Setting and storing personal data in memory
You will receive readings only if data has been programmed into the Tanita Remote Tabletop Display (*2).
(*2) : Go to http://www.thecompetitiveedge.com/downloads/ to view the remote display owner’s manual for display operation,
warnings, and other important information.
1. Select Personal Data Number
When unit is off, use the SET button to activate the unit.
Use Up/Down buttons to select a personal data number.
Press Set.
2. Set Age
Use Up/Down buttons to select age.
Press Set.
3.Select Female or Male
Use the Up/Down buttons to scroll through Female ( ) or Male ( ), Female/Athlete ( / ) and Male/Athlete ( / )
settings, then press the Set button.
4. Specify the Height
Use Up/Down buttons to select height.
Press Set.
5. Select Activity Level (Except Ironman model)
Use the Up button to specify Activity Level. Press the Set button to confirm.
The power will then shut down automatically.
Level 1 = Inactive lifestyles (little or no exercise)
Level 2 = Moderately active lifestyles (occasional, low intensity exercise)
Level 3 = Adult involved in intense physical activity (see p.1. for Tanita’s definition of Athlete)
Note : If you select the Athlete Mode, it will automatically set the Activity Level to Level 3.
Taking body composition readings
1. Before proceeding, make sure that the platform and watch/remote display/PC are within 17feet (5m) of each other.
2. Press the “UP” button to turn the unit on and then press the “UP/DOWN” buttons to select personal data number. (Do
notstandontheplatform.)
3. Press the SET button to confirm your personal number.
4. When the remote display and platform are paired, the platform will beep once, and the Green Indicator Light will
blink.
5.StepontotheplatformwhiletheGreenIndicatorLightisblinking.
6. After the measurement is complete, the platform will beep twice, and readings will automatically show on the
remote display.
7. Carefully step off platform after measurement is complete.
Note
: You must download the necessary USB drivers before connecting the USB ANT™ Stick to your computer.
Warning
Do not use the body fat reading feature of this product if you have a pacemaker or other electronic implanted medical device.
BC-1000.indd 4 09.5.22 0:20:15 PM